VMX88

Analogue Inputs – 8

Electronically Balanced, Phoenix connectors
CMRR : >70dB @ 1kHz Maximum Level >20dBu
Dynamic Range >120dB (20Hz – 20kHz A-weighted)
Input Impedance : 10kΩ Balanced

Analogue Outputs – 8

Electronically Balanced, Phoenix connectors
Maximum Level >20dBu
Dynamic Range >119dB (20Hz – 20kHz A-weighted)
Source Impedance : <60Ω

Performance

Frequency Response (20Hz to 20kHz) : +/-0.05Db
THD + N (-10dB @ 1kHz) : 0.001%
Latency : 0.427ms (in to out, analogue at 96kHz)

Processing [96kHz]

Input Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phase

Input Delay (per channel) : 0 to 1.3s in 10.4uS steps

Input Compressor (per channel) : Threshold (-30 to +22 dBu), Attack, Release, Ratio, Soft-Knee

Input Parametric EQ (per channel) : 8 bands – parametric, low shelf, high shelf, notch, band-pass

Input Dynamic EQ (per channel) : 2 bands – parametric/low shelf/high shelf, boost/cut above/below, threshold, ratio, attack, release

Input High-Pass Filter (per channel) : Up to 24dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley)

Routing Inputs to Outputs: Full matrix mixer including all local and Dante inputs to local outputs

Output Parametric EQ (per channel): 16 bands – parametric, low shelf, high shelf, notch, band-pass

Output High-Pass and Low-Pass Filter (per channel) : Up to 48dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley)

Output Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phase

Output Delay (per channel) : 0 to 1.3s in 10.4uS steps

Output Limiter (per channel) : Threshold (-50 to +22dBu), attack, release, auto attack/release option

Presets

Up to 30
Networked Audio : 8in / 8out Dante channels on dual redundant RJ45 connectors

Comms

100Mbps Ethernet on rear panel (RJ45 connector)

Power Requirements

3-pin IEC input, fused
90-250VAC, 50-60Hz < 40W

Dimensions

Height : 44mm (1.75inch) 1U
Depth : 170mm (6.75 inches)
Width : 482mm (19 inches)

Weight

Net : 2.2kg
Shipping : 3.4kg